Disassembly steps for household wall switch socket panel:

1. Turn on the wall switch and circuit breaker you want to remove, which can control the entire room or just on a specific wall.

2. Use a flat headed screwdriver to secure the switch cover to the wall of the junction box and remove the screws. Remove the cover plate and place the probe of the circuit tester on the screw terminal of each switch to ensure that there is no force to switch, refer to the instructions of the circuit tester.

3. Use a cross head screwdriver to unscrew two screws from the hotel wall switch socket and junction box. From the junction box, the wire terminal screws are located on the side of the switch.

4. On the upper side of the switch, loosen the terminal screw with a cross screwdriver, pull the wire away from the switch, and pull the switch away from the wall.

5. Plastic wire caps are placed at each wire end, and electrical tape is wrapped around each cap and the wire end cap to further secure the wire.